It's time for a

The modern electric chain hoist is designed for loads up to 37 tons. The IP66 protection rating makes the electric chain hoist suitable for any application.

Capacity

Full load

Protection class

Compact and robust

The robust aluminum-magnesium die-cast housing allows for optimal cooling of the engine, transmission and control unit during operation.

Double safety against overload

Electronic overload protection by standard frequency converter and mechanical overload protection by slipping clutch. The converter unit provides precise load control for smooth lifting and lowering of the load.

MAINTENANCE-FREE BRAKE

Positioning behind the slipping clutch for maximum safety.

GEARED LIMIT SWITCHES

For upper and lower hook end position easily adjustable in any position.

SERVICE-FRIENDLY

Easy replacement of chain guide and chain drive wheel without disassembling the chain hoist and without special tools.

Plug & Play

No electrically competent person is required to connect the hoist.

IP 66 protection class

By designing the chain hoist to protection class IP66, it is both dust-tight and protected against water jets.

Products

PF05S1-500

Capacity: 500 kg
Lifting speed: 8/2 m/min
Mechanical overload device (Slipping clutch)
Maintenance-free spring loaded disc brake
Operation temperature -20 °C to +45 °C
Housing protection through powder coating
Lower hook according to DIN 15400
European zinc plated and hardened chain (class T) according to DIN EN 818-7
Maximum noise level: 70 dB
3 m lift
Chain box
Standard suspension eye
Main motor controller including safety options
Electronic overload protection
Motor insulation class H
All components connected by plugs
Low voltage control
Emergency stop with main contactor
Separate brake rectifier to control the brake
Inverter traveling with EP or MS mode
Geared upper and lower limit switches
IP66 protection

PF12S1-1000

Capacity: 1,000 kg
Lifting speed: 8/2 m/min
Mechanical overload device (Slipping clutch)
Maintenance-free spring loaded disc brake
Operation temperature -20 °C to +45 °C
Housing protection through powder coating
Lower hook according to DIN 15400
European zinc plated and hardened chain (class T) according to DIN EN 818-7
Maximum noise level: 70 dB
3 m lift
Chain box
Standard suspension eye
Main motor controller including safety options
Electronic overload protection
Motor insulation class H
All components connected by plugs
Low voltage control
Emergency stop with main contactor
Separate brake rectifier to control the brake
Inverter traveling with EP or MS mode
Geared upper and lower limit switches
IP66 protection

PF25S1-2500

Capacity: 2,500 kg
Lifting speed: 8/2 m/min
Mechanical overload device (Slipping clutch)
Maintenance-free spring loaded disc brake
Operation temperature -20 °C to +45 °C
Housing protection through powder coating
Lower hook according to DIN 15400
European zinc plated and hardened chain (class T) according to DIN EN 818-7
Maximum noise level: 70 dB
3 m lift
Chain box
Standard suspension eye
Main motor controller including safety options
Electronic overload protection
Motor insulation class H
All components connected by plugs
Low voltage control
Emergency stop with main contactor
Separate brake rectifier to control the brake
Inverter traveling with EP or MS mode
Geared upper and lower limit switches
IP66 protection

PF16S2-3200

Capacity: 3,200 kg
Lifting speed: 4/1 m/min
Mechanical overload device (Slipping clutch)
Maintenance-free spring loaded disc brake
Operation temperature -20 °C to +45 °C
Housing protection through powder coating
Lower hook according to DIN 15400
European zinc plated and hardened chain (class T) according to DIN EN 818-7
Maximum noise level: 70 dB
3 m lift
Chain box
Standard suspension eye
Main motor controller including safety options
Electronic overload protection
Motor insulation class H
All components connected by plugs
Low voltage control
Emergency stop with main contactor
Separate brake rectifier to control the brake
Inverter traveling with EP or MS mode
Geared upper and lower limit switches
IP66 protection

PF25S2-5000

Capacity: 5,000 kg
Lifting speed: 4/1 m/min
Mechanical overload device (Slipping clutch)
Maintenance-free spring loaded disc brake
Operation temperature -20 °C to +45 °C
Housing protection through powder coating
Lower hook according to DIN 15400
European zinc plated and hardened chain (class T) according to DIN EN 818-7
Maximum noise level: 70 dB
3 m lift
Chain box
Standard suspension eye
Main motor controller including safety options
Electronic overload protection
Motor insulation class H
All components connected by plugs
Low voltage control
Emergency stop with main contactor
Separate brake rectifier to control the brake
Inverter traveling with EP or MS mode
Geared upper and lower limit switches
IP66 protection

Trolleys

PC12

• For use on parallel flanged beams
• Smooth running due to special plastic wheels
• Lateral guiding by track rollers
• Incl. tilt and fall protection
• Single bolt design for optimal and easy assembly

EC12/22

Electric drive controlled by frequency inverter
Capacity: 1,200–2,200 kg
Travel speed: 20/5 m/min
Operating voltage: 400 V/50 Hz
Motor power: 0.37 kW

EC34

Electric drive controlled by frequency inverter
Capacity: 3,400 kg
Travel speed: 20/5 m/min
Operating voltage: 400 V/50 Hz
Motor power: 0.37 kW

EC55/85/130

Electric drive controlled by frequency inverter
Capacity: 5,500–13,000 kg
Travel speed: 16/4 m/min
Operating voltage: 400 V/50 Hz
Motor power: 1x /2x 0.6 kW

Special designs

PITCH K - short headroom

Capacity up to 25 t
Solution for particularly low headroom
Versions with fixed or with push or electric trolley

PITCH S - twin hook hoist

Capacity up to 25 t
Optimized handling of long and bulky loads through synchronous lifting of two load strings
Distance between the two load strings can be adjusted to the working are (< 0.5 – 3 m).
Version with push or electric trolley